Electroshope

ELSNER KNX ROOM TOUCH CONTROLLER WITH SENSOR CALA TOUCH KNX 3.0 55 MM 70800

Was: AED 1,161.00 Now: AED 1,057.00 (Inclusive of VAT)

Qty:

Note: Image for illustrative purpose only, original product will be delivered as per your order specification on the item description, please refer technical data sheet for more information about the product.

PROTOCOL : KNX
RELATIVE HUMIDITY : 5...95% RH, avoid bedewing
OPERATING TEMPERATURE : -10C to 50C
IP RATING : IP20
HS Code :
Lead Time : 10-15 DAYS
VIEW MORE PRODUCT DETAILS

Download Product Catalogue

Free Shipping Across UAE
When you spend above 699 AED

100% Genuine Products
Sourced from Trusted Independent Suppliers







Cala Touch KNX 3.0

Room Controller 55 mm


The Room Controller Cala Touch KNX for the KNX bus system measures various ambient climate. Via the bus, the indoor sensor can receive external values and process them further with its own data to a total value (mixed value, e.g. room average).

All measured values can be used for the control of threshold value-dependent switching outputs. States can be linked via AND logic gates and OR logic gates. Multifunctional modules change input data as required by means of calculations, querying a condition, or converting the data point type. In addition, an integrated manipulated variable comparator can compare and output variables that were received via communication objects.

Integrated PI-controllers control ventilation (according to humidity or CO2-concentration) and/or heating/cooling (according to temperature), depending on the respective model.

Cala Touch KNX features a touch display that shows various display and control pages depending on the individual configuration. There is one page available that shows the current measured values, a menu area to adjust device settings and pages with touch control elements for internal temperature control, for light (manual switching or dimming), for shades or windows (manual operation). The integrated timer is a useful helper in everyday life.

Cala Touch KNX is supplemented with a frame of the switch series used in buildings, and thus fits seamlessly into the interior fittings.

Models:

N 70800 Cala Touch KNX T, white with temperature sensor
N 70802 Cala Touch KNX T, black with temperature sensor
N 70810 Cala Touch KNX TH, white with temperature and humidity sensor
N 70812 Cala Touch KNX TH, black with temperature and humidity sensor
N 70820 Cala Touch KNX AQS/TH, white with temperature, humidity and CO2-sensor
N 70822 Cala Touch KNX AQS/TH, black with temperature, humdity and CO2-sensor

Delivery without frame


FUNCTIONS

Common features in all models:

  • Colour touch display with display and operating pages for
    - 1 display of current measured values
    - 1 display of bus data (4 universal spaces)
    - 1 temperature control (incl. mode change, indication whether heating/ cooling active); can also be used as an extension unit for operating another controller
    - 3 drive operation (shading, window) with buttons, slider, position display (incl. slat position)
    - 3 switching or dimming of light (with percentage display)
    - 1 RGB light control
    - 1 light color temperature setting
    - 1 HCL control (adaption of light color temperature over adjustable periods of time)
    - 1 scenes (4 scenes with recall, storage, status indication)
    - weekly timer switch with 8 periods
    - 2 info page (each displays 2 text objects)
    - device settings
  • Screen saver (clock, clock/indoor/outdoor temperature alternately, off) may be switched on or off
  • Key tone may be switched on or off
  • 4 inputs for binary contacts or T-NTC temperature sensor.
  • 8 AND and 8 OR logic gates each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
  • 8 multi-function modules (computers) for changing the input data by calculations, by querying a condition or by converting the data point type
  • 4 manipulated variable comparators to output minimum, maximum or average values. 5 inputs each for values received via communication objects
  • Summer compensation for cooling systems. A characteristic curve matches the target temperature in the room to the external temperature and sets the minimum and maximum target temperature values

Cala Touch KNX AQS/TH functions (no. 70820, 70822):

  • Measuring the CO2-concentration of the air, the temperature and air humidity (relative, absolute), each with mixed value calculation. The share of internal measurement value and external value can be set as a percentage
  • Bus message, whether the values for temperature and air humidity are within the comfort field (DIN 1946). Dew point calculation
  • Threshold values can be adjusted per parameter or via communication objects
  • PI-controller for heating (one or two-level) and cooling (one or two-level) according to temperature. Regulation according to separate set points or basic set point temperature. Fan coil control
  • PI controller for ventilation according to humidity and CO2-concentration: Ventilate/Air (one-level) or Ventilate (one or two-levels)

Cala Touch KNX TH functions (no. 70810, 70812):

  • Temperature and air humidity measurement (relative, absolute), in each case with mixed value calculation. The share of internal measurement value and external value can be set as a percentage
  • Bus message, whether the values for temperature and air humidity are within the comfort field (DIN 1946). Dew point calculation
  • Threshold values can be adjusted per parameter or via communication objects
  • PI-controller for heating (one or two-level) and cooling (one or two-level) according to temperature. Regulation according to separate setpoints or basic set point temperature. Fan coil control
  • PI controller for ventilation according to humidity: Ventilate/Air (onelevel) or Ventilate (one or two-level)

Cala Touch KNX T functions (no. 70800, 70802):

  • Measuring the Temperature with a mixed value calculation. The share of internal measurement value and external value can be set as a percentage
  • Threshold values can be adjusted per parameter or via communication objects
  • PI-controller for heating (one or two-level) and cooling (one or two-level) according to temperature. Regulation according to separate set points or basic set point temperature. Fan coil control


TECHNICAL DATA

MaterialReal glass, plastic
DisplayVisible diagonal: 2.3 inch (59 mm)
Resolution: 320 240 pixel
Colours black glass, black housing (jet black RAL 9005)
white glass, white housing (pure white RAL 9010)
AssemblyFlush mounting (Wall mounting in junction box 60 mm, 42 mm deep)
Protection categoryIP 20
Dimensionsapprox. 55 55 35 (W H D, mm), mounting depth approx. 7 mm
Total weightapprox. 90 gr (incl. supply line, base plate
Ambient temperatureOperation 0...+55C, storage -30+70C
Ambient humiditymax. 5...95% RH, avoid condensation
Operating voltageKNX bus voltage
Bus currentmax. 18 mA
Data outputKNX +/- bus connector terminal
Communication objectsCala Touch KNX AQS/TH: 471
Cala Touch KNX TH: 433
Cala Touch KNX T: 379
Inputs4 analogue/ digital, max. cable length 10 m.
measuring range T-NTC temperature sensor on Cala input-40C...+80C
CO2-sensor (for Cala Touch KNX AQS/TH) CO2-measuring range300...5000 ppm
Temperature sensor (for Cala Touch KNX AQS/TH, Cala Touch KNX TH, Cala Touch KNX T) Temperature measuring range-20...+70C
Humidity sensor (for Cala Touch KNX AQS/TH, Cala Touch KNX TH) Humidity measuring range0% RH 100% RH






Specifications

BrandELSNER
Model NumberELSNER CALA TOUCH 70800
PROTOCOL KNX
RELATIVE HUMIDITY 5...95% RH, avoid bedewing
OPERATING TEMPERATURE -10C to 50C
IP RATING IP20
Lead Time 10-15 DAYS