Electroshope

ELSNER KNX LEAKAGE SENSOR FOR WATER PIPE BREAK DETECTION LEAK KNX BASIC 70315

Was: AED 640.00 Now: AED 596.00 (Inclusive of VAT)

Qty:

Note: Image for illustrative purpose only, original product will be delivered as per your order specification on the item description, please refer technical data sheet for more information about the product.

PROTOCOL : KNX
IP RATING : IP 68
HS Code :
Lead Time : 10-15 DAYS
VIEW MORE PRODUCT DETAILS

Download Product Catalogue

Free Shipping Across UAE
When you spend above 699 AED

100% Genuine Products
Sourced from Trusted Independent Suppliers







Leak KNX basic

Leakage Sensor for Water/Pipe Break Detection

The Leakage sensor Leak KNX basic for the KNX building bus system recognizes water, e.g. in case of a pipe breakage. If there is water between the electrodes of the probe, an alarm message will be sent to the KNX bus.

  • Detection of water on the probe
  • Alarm signal sent to the KNX bus with a text message
  • 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 16 logic inputs in the form of communication objects, may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
  • Configuration is made using the KNX software ETS 5


MaterialCasing / electrodes: stainless steel A2
Installationfor placing on the floor
Degree of protectionIP 68
Electrode chemical resistanceWater
DimensionsDiameter: approx. 77 mm
Height: approx. 33 mm
Cable lengthapprox. 140 mm (plus cable grip and plugs)
Ambient temperatureOperation -25+85 C, storage -40+125C
Weightapprox. 210 g (without junction box)
Operating voltagebus voltage
Power on the bus30 mA
Data outputKNX +/- Bus connector terminal
Communication objects54


Specifications

BrandELSNER
Model NumberELSNER LEAK KNX BASIC 70315
PROTOCOL KNX
IP RATING IP 68
Lead Time 10-15 DAYS