LUMEL LCD Digital 3-Phase Power Monitoring Network Meter Rail Mounted with RS-485 Interface, USB N43

Destined for direct (up to 63A) and indirect measurements in 3 phase 4 wire/3 wire balanced and unbalanced systems.

• For direct (up to 63A) and indirect measurement, in 3 phase 4 wire/ 3 wire balanced and unbalanced systems.
• The measurement of: rms values of voltage and current, active, reactive and apparent power, acti ve, reacti ve energy, power factors, frequency, THD.
• Indications considering values of programmed rati os.
• Programmable display pages.
• 3 programmable alarm outputs and 1 pulse output in the standard version.
• Pulse output for monitoring of 3-phase active energy.
• Analog outputs after adding S4AO module.
• Digital transmission to the master system through the RS-485 interface    (MODBUS).
• USB for configuration by using free eCon software.
• Modern design allows for installation of the meter in modular switchgear in accordance with EN 62208 (meter has a width of 6 modules) on 35 mm rail.

• the measurement of:
  • rms values of voltage and current,
  • active, reactive and apparent power,
  • active, reactive energy,
  • power factors,
  • frequency
  • THD
• indications considering values of programmed ratios,
• programmable current and voltage ratios,
• 12 programmable screens/pages,
• backlit LCD display,
• digital transmission to the master system through the RS-485 interface with Modbus protocol,
• configurable alarm outputs,
• the pulse output for monitoring of 3-phase active energy,
• analog outputs are available by connecting S4AO module,
• USB for configuration by using free eCon software,
• implemented function for software updating,
• modern design allows for installation of the meter in modular switchgear in accordance with EN 62208 (meter has a width of 6 modules) on 35 mm rail,
• external dimensions: 105 x 110 x 60mm.

.